View B39202B8522P810_9075491.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer lte band 2 / cdma bc1 series/type: ordering code: b8522 B39202B8522P810 date: version: january 07, 2015 2.1 ? epcos ag 201 5 . reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without epcos' prior express consent is prohibited. epcos ag is a tdk group company.
2 january 22, 2015 b8522 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for mobile telephonelte band 2 and cdma bc1 systems n low insertion attenuation n low amplitude ripple n usable passband 60 mhz features n package size 1.8 x 1.4 mm 2 , max. height 0.475 mm n rohs compatible n approx. weight 0.0035g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n fully matched by integrated matching network ex- cept for rx port matching n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitivity l evel 3 bottom view top view side view 0.3 4 0.35 0.25 0.25 8 4 8 1.4 1.8 1 2 3 6 5 7 5 6 1 2 3 7 0.5 max. 0.7 0.475 max 0.3 0.35 pin configuration n 3 tx input n 1 rx output n 6 antenna n 2, 4, 5, 7, 8 to be grounded 1 6 2,4,5 3 7,8,9 1 3 6 4,5 2,7,8
3 january 22, 2015 b8522 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C20 ?c to +90 ?c tx terminating impedance: z tx = 50 w ant terminating impedance: z ant = 50 w rx terminating impedance: z rx = 50 w + 2.2nh b8522 characteristics tx - ant 1) 1) specified min./max. values are valid for a testing power of +10 dbm. min. typ. @ 25?c max. center frequency f c 1880 mhz maximum insertion attenuation a max 1850.24 ... 1909.76 mhz a lte 2.0 2.9 db 1851.25 ... 1908.75 mhz a cdma 1.9 2.7 2) 2) valid for extended temperature range from -30 ?c to +90 ?c db @f carrier 1852.40 ... 1907.60 mhz a wcdma 3) 3) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (6). 1.8 2.4 4) 4) valid for reduced temperature range from -20 ?c to +85 ?c db error vector magnitude evm 5) 5) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. @f carrier 1852.40 ... 1907.60 mhz 0.9 3.0 % @f carrier 1852.40 ... 1907.60 mhz 0.9 2.5 6) 6) valid for room temperature 25 ?c % input vswr (tx port) 1850.24 ... 1909.76 mhz 1.5 2.0 output vswr (ant port) 1850.24 ... 1909.76 mhz 1.5 2.0 attenuation a 10.0 ... 894.0 mhz 37 40 db 1565.4 ... 1605.9 mhz 45 50 db 1605.9 ... 1680.0 mhz 30 49 db 1930.24 ...1989.76 mhz 44 51 db 2010.0 ... 2025.0 mhz 20 45 db 2110.0 ... 2155.0 mhz 44 48 db 2400.0 ... 2500.0 mhz 25 32 db 3690.0 ... 3830.0 mhz 21 26 db 5150.0 ... 5850.0 mhz 18 23 db
4 january 22, 2015 b8522 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristicstemperature range for specification: t = C20 ?c to +90 ?c tx terminating impedance: z tx = 50 w ant terminating impedance: z ant = 50 w rx terminating impedance: z rx = 50 w + 2.2nh b8522 characteristics ant - rx 1) 1) specified min./max. values are valid for a testing power of +10 dbm. min. typ. @ 25?c max. center frequency f c 1960 mhz maximum insertion attenuation a max 1930.24 ... 1989.76mhz a lte 2.3 3.4 db 1931.25 ... 1988.75mhz a cdma 2.2 3.2 2) 2) valid for extended temperature range from -30 ?c to +90 ?c db @f carrier 1932.40 ... 1987.60mhz a wcdma 3) 3) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (6). 2.1 2.9 4) 4) valid for reduced temperature range from -20 ?c to +85 ?c db input vswr (ant port) 1930.24 ... 1989.76 mhz 1.5 2.0 output vswr (rx port) 1930.24 ... 1989.76 mhz 1.4 2.0 attenuation a 1.0 ... 700.0 mhz 40 43 db 80.0 mhz 50 58 db 700.0 ... 1850.0 mhz 34 37 db 1850.24 ...1909.76 mhz 45 53 db 2050.0 ... 2075.0 mhz 25 38 db 2075.0 ... 2400.0 mhz 27 32 db 2400.0 ... 2550.0 mhz 25 29 db 2550.0 ... 3000.0 mhz 33 38 db 3000.0 ... 6000.0 mhz 40 46 db
5 january 22, 2015 b8522 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C20 ?c to +90 ?c tx terminating impedance: z tx = 50 w ant terminating impedance: z ant = 50 w rx terminating impedance: z rx = 50 w + 2.2nh b8522 characteristics tx - rx 1) 1) specified min./max. values are valid for a testing power of +10 dbm. min. typ. @ 25 ?c max. isolation 1574.00 ... 1577.00 mhz 40 60 db 1850.24 ... 1909.76 mhz 53 56 db 1930.24 ... 1989.76 mhz 50 54 db 3700.00 ... 3820.00 mhz 20 58 db 5550.00 ... 5850.00 mhz 20 53 db b8522 linearity min. typ. @ 25 ?c max. triple beat test 1) 1) blocker1 - tx + blocker2 @ cw input powers at ant.-port, setup1/2/3: tx: 1855/1880/1911 mhz @ +21.5 dbm, blocker1: 1856/1881/1911 mhz @ +21.5 dbm, blocker2: 1935/1960/1990 mhz @ -27 dbm, tb product: 1934&1936/1959&1961/1989&1991 mhz 70 db imd product levels 2) 2) @ f tx =[1850 ... 1910 mhz], f rx =[1930 ... 1990mhz], f rx - f tx =80mhz , imd product levels for power levels p tx =21dbm (antenna port output power) and p blocker =-15dbm (antenna port input power) imd2, blocker 1 80.0 mhz 105 dbm imd2, blocker 2 3780.0 ... 3900.0 mhz 115 dbm imd3, blocker 3 1770.0 ... 1830.0 mhz 107 dbm imd3, blocker 4 5630.0 ... 5810.0mhz 120 dbm
6 january 22, 2015 b8522 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet annotation for characteristics section attenuation of wcdma signal (powertransferfunction, a wcdma ) is determined by f carrier according to 3gpp ts 25.101 (e.g. for wcdma band 2 passband, f carrier ranges from 1852.4 mhz (lowest tx channel) to 1907.6 mhz (highest tx channel)). h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: maximum ratings operable temperature range t C30/+90 ?c storage temperature range t stg C40/+90 ?c dc voltage v dc 0 v esd voltage v esd 300 1) 1) acc. to jesd22-a114f (human body model), 1 negative & 1 positive pulse. v human body model, 1 pulse v esd 600 2) 2) acc. to jesd22-c101c (charged device model), 3 negative & 3 positive pulses. v charged device model, 3 pulses input power at p in source and load impedance 50 w 1850.24 ... 1909.76 mhz elsewhere 2810 dbmdbm continuous wave t = 50?c, >5.000 h } s sd 21 f ( ) h rrc f f carrier C ( ) 2 fd h rrc f ( ) 2 f 1 = d
7 january 22, 2015 b8522 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx - ant (passband, lte specification)frequency response tx - ant
8 january 22, 2015 b8522 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx - ant (wideband)frequency response ant - rx (passband, lte specification)
9 january 22, 2015 b8522 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response ant - rxfrequency response ant - rx (wideband)
10 january 22, 2015 b8522 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx - rx isolation
11 january 22, 2015 b8522 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. vswr s 11 tx-port vswr s 33 rx-port vswr s 22 ant-port
12 january 22, 2015 b8522 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet references type b8522 ordering code b39202-b8522-p810 marking and package c61157-a8-a87 packaging f61074-v8259-z000 date codes l_1126 s-parameters b8522_nb_un.s3p (unmatched, narrow band)b8522_wb_un.s3p (unmatched, wide band) see file header for port/pin assignment table soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8th, 2011, on the restriction of the use of cer- tain hazardous substances in electrical and electronic equip- ment ("directive") with due regard to the application of exemp- tions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos agsystems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2015. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
13 january 22, 2015 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, deltacap, digisimic, dssp, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39202B8522P810

	To Download B39202B8522P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .